Description

Chain Driven Roller Conveyor – Model CDLR19

Chain Driven Roller Conveyors provide positive drive with their sprocketed roller system.  Chain driven roller conveyors are excellent for moving pallets, drums, tires, and heavy loads at controlled speeds. With 1.9″ dia., 12 ga., rollers this CDLR conveyor can transport 400 lbs per foot when using supports on 10ft centers.

Roller Centers: 3.500” or 4.000” with 40A18 sprockets.

Effective Widths: Standard widths are 13”, 19”, 25”, 31,” 37”, 43,” and 49”. Also available from 6” to 49” in 1” increments.

Lengths: Even increments of the roller centers up to 50’. Length also limited to 75 rollers on each side of the drive.

Drive: Standard D16 – side, bottom, near center with live axle drive roller. Drive has cast iron worm gear speed reducer with a standard M99 1/2 H.P. 230/460 TEFC motor.

Speed: Standard 30 feet per minute. Also available from 1 to 120 feet per minute.

Rollers: Standard 1912; 1.9 dia., 12 ga. wall tubes with 7/16” hex cold rolled steel axle, spring retained. Standard A23 bearings are grease packed with front and back seals.

Frame: Standard F25 5” x 1-1/2” x 3/16” channel on chain; box side, 3-1/2” x 1-1/2” x 3/16” channel roller set high on idler side with bolted 5” x 1-1/2” x 3/16” crosstie.

Chain Covers: 1/8” steel with two piece construction for easy access to chain loops.

Supports: SPHH style adjustable set for standard 36” top of rollers located on nominal 10’ centers. Also available from 11” to 42” top of roller at no additional charge.

Capacity: Up to 400 lbs. per lineal foot of conveyor with supports on 10’ centers. Several factors affect conveyor capacity. Consult factory to evaluate specific applications.

Guard Rails: Standard G99: No Guard Rail.

Roll Covers: Standard V98: No Roll Cover.

Finish: Standard PP94: Safety Blue, Epoxy Powder Coat