Description

Chain Driven Live Roller Conveyor – Model CDLR26

Chain Driven Live Roller Conveyors provide positive drive with their sprocketed roller system.  Chain driven live roller conveyors are excellent for moving pallets, drums, tires, and heavy loads at controlled speeds. With 2.625″ dia., 7 ga., rollers this CDLR conveyor can transport 1,000 lbs per foot when using supports on 5ft centers.

[hr color=”red” width=”95%” border_width=”1px” ]

Roller Centers: 4.00” with 40A21 sprockets; 4.50” with 60A15 sprockets; 5.00” with 50A19 sprockets; 6.00” with 60A16 sprockets; 7.50” with 60A16 sprockets; 12.00” with 60A16 sprockets.

Effective Widths: 13”, 19”, 25”, 31”, 37”, 43”, 49”, 54”, 57”, 61”. Also Available from 6” to 61” in 1” increments.

Lengths: Even increments of the roller centers up to 75’. Length also limited to 75 rollers on each side of the drive.

Drive: Standard D16 – side, bottom, near center with live axle drive roller. Drive has cast iron worm gear speed reducer with a standard M03 3/4 H.P. 230/460 TEFC motor.

Speed: Standard 30 feet per minute. Also available from 1 to 120 feet per minute.

Rollers: Standard 2607; 2.625 dia., 7 ga. wall tubes with 11/16 hex cold rolled steel axle, spring retained. Standard A51 bearings are grease packed.

Frames: Standard F23 6” x 1-1/2” x 3/16” channel on chain box side, 4” x 1-1/2” x 3/16” channel rollers set high on idler side with bolted 5” x 1-1/2” x 3/16” crosstie.

Chain Covers: 1/8” steel with two piece construction for easy access to chain loops.

Supports: SPHH style adjustable set for standard 36” top of rollers located on nominal 5’ centers. Also available from 11” to 42” top of roller at no additional charge.

Capacity: Up to 1,000 lbs. per lineal foot of conveyor with supports on 5’ centers. Several factors affect conveyor capacity. Consult factory to evaluate specific applications.

Guard Rails: Standard G99: No Guard Rail.

Roll Covers: Standard V98: No Roll Cover.

Finish: Standard PP94: Safety Blue, Epoxy Powder Coat.